ITshiken　300-115問題集を使用し、試験準備は十分で、試験はよく自信をもっています。

受験準備の一番いい方法は教科書を復習しないで、実際の試験問題を練習します。

出題範囲をすばやく理解し、65％の試験準備時間を節約します。

何度も実際の問題を練習し、自分の弱みところを理解し克服する

いつ始まる300-115問題集を使用しますか?

300-115問題集は資格の認定の完全なプロセスに同行します

学習期間から試験準備まで、いつでもどこでも300-115問題集を使用することができます。

学習期間に300-115問題集を使用し、試験に合格することを目指す学習計画を作成します。

試験準備する時、300-115 SWITCH試験の実際問題と解答を読書し、気楽に試験に合格することができます。

どのように300-115問題集を選択しますか。

他のウェブサイトとは異なり、ITshikenは300-115試験の100%真実の模擬練習を提供し、試験準備のための最初の選択になります。

自由に問題を査閲する

自由にすべての300-115問題の実際の問題と解答を査閲します。

ご注意：新規登録されていないユーザーは15の質問と回答を表示でき、登録ユーザーはすべての質問と回答を表示できます。

問題集は継続的に更新

300-115 SWITCH試験のすべての問題と解答、実際の試験内容の変化によって、迅速にアップデートされています。

300-115問題集の問題と解答は信頼性を確保するために、長年にわたる関連試験経験を持つ専門家によってレビューされます。

いつ、どこ練習

ネットワークがあれば、ブラウザーで300-115の問題集にアクセスして練習することができます。

コンピュータとモバイルエンドの両方がアクセスのためのいいユーザーエクスペリエンスを持ち、すべての広告情報が削除されます。

300-115 問題集について

300-115 問題集は試験のために調整され、これにより、最も高い確率で試験に合格することができます。300-115 問題集と練習問題の違い：

問題練習の範囲を縮小し、最新の300-115 SWITCH試験の問題と回答をより正確に練習問題にマッチさせています。

試験に合格する正解率を高め、300-115 問題集には練習問題よりも部分の問題数、練習問題には現れていません。

印刷後に持ち運びが便利：300-115 問題集は印刷およびオフラインで表示するためにPDF形式で指定のメールボックスに送信されます。

無料で一年に高品質な更新；試験に最新の質問と回答を得るためにITshikenに直接お問い合わせください。より直接的で効果的です。

練習中に良い経験を獲得し：問題が発生した箇所のロックを解除し、次のページに表示される認証コードをクリックします。

返金保証

問題集の変更の不確定性を対応し、最高の正解率を獲得することができます。

もし、300-115 問題集を購入したら、試験に不合格だった、ITshikenが全額で返金することができます。ITshikenの返金については、不合格Cisco公式の成績単は必要なので、スキャンーして送 ってきてください！

What is the maximum number of switches that can be stacked using Cisco StackWise?
A. 4
B. 5
C. 8
D. 9
E. 10
F. 13
Answer: D

A network engineer wants to add a new switch to an existing switch stack.
Which configuration must be added to the new switch before it can be added to the switch stack?
A. No configuration must be added.
B. stack ID
C. IP address
D. VLAN information
E. VTP information
Answer: A

What percentage of bandwidth is reduced when a stack cable is broken?
A. 0
B. 25
C. 50
D. 75
E. 100
Answer: C

After an EtherChannel is configured between two Cisco switches, interface port channel 1 is in the down/ down state. Switch A is configured with channel-group 1 mode active, while Switch B is configured with channel-group 1 mode desirable.
Why is the EtherChannel bundle not working?
A. The switches are using mismatched EtherChannel negotiation modes.
B. The switch ports are not configured in trunking mode.
C. LACP priority must be configured on both switches.
D. The channel group identifier must be different for Switch A and Switch B.
Answer: A

An EtherChannel bundle has been established between a Cisco switch and a corporate web server. The network administrator noticed that only one of the EtherChannel links is being utilized to reach the web server.
What should be done on the Cisco switch to allow for better EtherChannel utilization to the corporate web server?
A. Enable Cisco Express Forwarding to allow for more effective traffic sharing over the EtherChannel bundle.
B. Adjust the EtherChannel load-balancing method based on destination IP addresses.
C. Disable spanning tree on all interfaces that are participating in the EtherChannel bundle.
D. Use link-state tracking to allow for improved load balancing of traffic upon link failure to the server.
E. Adjust the EtherChannel load-balancing method based on source IP addresses.
Answer: E

Interface FastEthernet0/1 is configured as a trunk interface that allows all VLANs. This command is configured globally: monitor session 2 filter vlan 1 - 8, 39, 52
What is the result of the implemented command?
A. All VLAN traffic is sent to the SPAN destination interface.
B. Traffic from VLAN 4 is not sent to the SPAN destination interface.
C. Filtering a trunked SPAN port effectively disables SPAN operations for all VLANs.
D. The trunk's native VLAN must be changed to something other than VLAN 1.
E. Traffic from VLANs 1 to 8, 39, and 52 is replicated to the SPAN destination port.
Answer: E

A network engineer notices inconsistent Cisco Discovery Protocol neighbors according to the diagram that is provided. The engineer notices only a single neighbor that uses Cisco Discovery Protocol, but it has several routing neighbor relationships.
What would cause the output to show only the single neighbor?
A. The routers are connected via a Layer 2 switch.
B. IP routing is disabled on neighboring devices.
C. Cisco Express Forwarding is enabled locally.
D. Cisco Discovery Protocol advertisements are inconsistent between the local and remote devices.
Answer: A

After the implementation of several different types of switches from different vendors, a network engineer notices that directly connected devices that use Cisco Discovery Protocol are not visible.
Which vendor-neutral protocol could be used to resolve this issue?
A. Local Area Mobility
B. Link Layer Discovery Protocol
C. NetFlow
D. Directed Response Protocol
Answer: B

Several new switches have been added to the existing network as VTP clients. All of the new switches have been configured with the same VTP domain, password, and version.
However, VLANs are not passing from the VTP server (existing network) to the VTP clients.
What must be done to fix this?
A. Remove the VTP domain name from all switches with "null" and then replace it with the new domain name.
B. Configure a different native VLAN on all new switches that are configured as VTP clients.
C. Provision one of the new switches to be the VTP server and duplicate information from the existing network.
D. Ensure that all switch interconnects are configured as trunks to allow VTP information to be transferred.
Answer: D

After implementing VTP, the extended VLANs are not being propagated to other VTP switches.
What should be configured for extended VLANs?
A. VTP does not support extended VLANs and should be manually added to all switches.
B. Enable VTP version 3, which supports extended VLAN propagation.
C. VTP authentication is required when using extended VLANs because of their ability to cause network instability.
D. Ensure that all switches run the same Cisco IOS version. Extended VLANs will not propagate to different IOS versions when extended VLANs are in use.
Answer: B

After the recent upgrade of the switching infrastructure, the network engineer notices that the port roles that were once "blocking" are now defined as "alternate" and "backup."
What is the reason for this change?
A. The new switches are using RSTP instead of legacy IEEE 802.1D STP.
B. IEEE 802.1D STP and PortFast have been configured by default on all newly implemented Cisco Catalyst switches.
C. The administrator has defined the switch as the root in the STP domain.
D. The port roles have been adjusted based on the interface bandwidth and timers of the new Cisco Catalyst switches.
Answer: A

An administrator recently configured all ports for rapid transition using PortFast. After testing, it has been determined that several ports are not transitioning as they should.
What is the reason for this?
A. RSTP has been enabled per interface and not globally.
B. The STP root bridge selection is forcing key ports to remain in non-rapid transitioning mode.
C. STP is unable to achieve rapid transition for trunk links.
D. The switch does not have the processing power to ensure rapid transition for all ports.
Answer: C

Which technique automatically limits VLAN traffic to only the switches that require it?
A. access lists
B. DTP in nonegotiate
C. VTP pruning
D. PBR
Answer: C

What effect does the mac address-table aging-time 180 command have on the MAC address- table?
A. This is how long a dynamic MAC address will remain in the CAM table.
B. The MAC address-table will be flushed every 3 minutes.
C. The default timeout period will be 360 seconds.
D. ARP requests will be processed less frequently by the switch.
E. The MAC address-table will hold addresses 180 seconds longer than the default of 10 minutes.
Answer: A

While working in the core network building, a technician accidently bumps the fiber connection between two core switches and damages one of the pairs of fiber. As designed, the link was placed into a non-forwarding state due to a fault with UDLD. After the damaged cable was replaced, the link did not recover.
What solution allows the network switch to automatically recover from such an issue?
A. macros
B. errdisable autorecovery
C. IP Event Dampening
D. command aliases
E. Bidirectional Forwarding Detection
Answer: B